Set of crash bars upper and lower part + headlights compatible with BMW F 850 GS / F 750 GS 18-20 + Skid Plate

Set consisting of a set of crash bars at the top and bottom + headlights + aluminum engine protection, mounting material
Set consisting of a Motoguard engine protection bar at the bottom, fairing protection bar at the top and LED auxiliary headlights Lumitecs S22X
Motorcycle crash bars as optimal protection for driver and machine in the event of a fall or a fall
Reliably prevent or reduce damage to the engine and can prevent expensive repairs
Protection for those further up Parts such as fairing, tank or add-on parts
Made of extremely stable steel tube with a diameter of 28mm and 22mm
Mounting points of the protective bars are chosen in such a way that the impact energy is optimally distributed and selective high loads are avoided
Freedom from lean angles is fully maintained
Optimally adapted to the motorcycle, perfect fall protection in combination with off-road optics
Bent on the most modern CNC bending machines for absolute accuracy of fit
Double powder coating for optimal rust protection: first layer with zinc primer, second layer black for a flawless surface
LED auxiliary headlights with bracket for crash bars 25-27mm, wiring harness and protective grille
Daylight Illumination in the dark using the latest LED technology
Increased safety even during the day thanks to better visibility for other road users
Extra wide light cone for the best illumination even on the roadside
High-performance LED Chip for a long service life with constant performance
Aluminium housing for perfect protection of the lighting technology
Lamp grille to protect the lens from stone chipping
100% waterproof and dustproof according to IP67 Standard sealed housing
Bracket for mounting on crash bars or other tubes between 25mm-27mm diameter
Diameter 57mm, depth 105mm
Input voltage 9-30 volts, 18 Watt, light output 4,000 lumens, light color 6,000 K
With ECE homologation
Important: Installation requires knowledge of motorcycle electronics, if in doubt have it installed by a specialist workshop.
Crash bars / crash pads do not need to be registered
Motoguard engine protection in an extra stable design made of aluminum with 3mm wall thickness
Perfect protection of the underbody, the engine housing and the manifold in the endangered areas areas
Generously dimensioned front spoiler to enable the largest possible protective area
Numerous cut-outs in the underbody protection for unrestricted ventilation and to prevent heat build-up
Scope of delivery: Set of crash bars above and below + headlights, aluminum engine protection, mounting material